Skip to main content
OptiResume
Check resume
All drives

Placement drive

L&T Technology Services Graduate Engineer Trainee (GET): Eligibility and Resume Checklist (2026)

L&T Technology Services's Graduate Engineer Trainee (GET) is a core engineering hiring track. Prep sites report the bar as a 6.75 CGPA and 60% in Class 10 and 12, which is not an official figure. This page lays out the full eligibility, the skills your resume should surface, and how to check your resume against the role. L&T Technology Services does not publish official numbers for this track, so the figures below are the widely-reported consensus, not a hard line, verify before you apply.

Eligibility criteria

What a L&T Technology Services recruiter is reported to check first. L&T Technology Services does not publish these figures; prep sites report them.

Minimum CGPA
6.75 and above, reported by prep sites, not published by L&T Technology Services
Class 10
60% and above, reported by prep sites, not published by L&T Technology Services
Class 12
60% and above, reported by prep sites, not published by L&T Technology Services
Active backlogs
Not allowed at the time of application
Backlog history
L&T Technology Services publishes no rule on cleared (history) backlogs
Preferred branches
Mech, EEE, Metallurgy, Mechatronics
Package (reported, not official)
₹4 LPA
Selection gate
Academic cutoff plus an online aptitude and coding test
Cutoff type
Informal, the company does not publish official numbers
Last checked
Q4 2026

Source, careerstn.com, freshershunt.in, freshershunt.in, last checked Q4 2026, confidence medium

Skills your resume should show

These are the skills L&T Technology Services tests and screens for on this track. List only the ones you can defend, and prove each with a real project or bullet. An unbacked skill list reads as filler.

    Source, careerstn.com, freshershunt.in, freshershunt.in, last checked Q4 2026

    What to know before you apply

    FY26 off-campus GET drive (2026 batch, Apr 2026), as reproduced by two aggregators from the same Superset posting (not independent reports): 60% or 6.75 CGPA in each of 10th, 12th and graduation, no active backlog, and the final year cleared in the first attempt. Earlier cleared backlogs are not addressed. Structure: 3-month classroom phase at ₹25,000 a month, then 12 months on the job; CTC ₹4,00,100 with a ₹2 lakh undertaking for 2 years 9 months. Branches change per posting (a Feb 2026 posting listed Mechanical, Electrical, Civil and Instrumentation), so re-check each window. The Apr 2026 window has closed; no 2027-batch drive found yet.

    Source, careerstn.com, freshershunt.in, freshershunt.in, last checked Q4 2026

    How the interviews go

    Reported
    1. 1Technical interview (30-45 min, panel)
    2. 2HR interview (20-35 min)

    Project deep-dive is the most repeated theme; CS: OOP, DBMS/SQL, OS, C/C++; core: branch fundamentals. HR: relocation (Mysuru, Vadodara, Chennai, Pune, Hyderabad, Bengaluru etc.), five-year goals, and acceptance of the 2 year 9 month service undertaking.

    Based on several candidates' reports, checked 2 Nov 2026. Interviews vary by drive and interviewer.

    Reported by, GfG: LTTS Interview Experience (On-Campus), GfG: LTTS Interview Experience, GfG: LTTS Associate Engineer On-Campus 2021, Hyring: LTTS Interview Process & Experience (2026)

    L&T Technology Services Graduate Engineer Trainee (GET) FAQ

    What is the CGPA cutoff for L&T Technology Services Graduate Engineer Trainee (GET)?

    Prep sites report a 6.75 CGPA minimum. L&T Technology Services does not publish an official cutoff for this track, so treat 6.75 as a reported figure, not a hard line, and aim higher where you can.

    Are backlogs allowed for the L&T Technology Services Graduate Engineer Trainee (GET) drive?

    Not allowed at the time of application. L&T Technology Services publishes no rule on cleared (history) backlogs.

    Which skills should my resume show for L&T Technology Services Graduate Engineer Trainee (GET)?

    Prioritise . List only what you can defend in an interview, and back each claim with a project or a bullet that shows you used it, an unproven skill list reads as filler.

    What percentage do I need in 10th and 12th for L&T Technology Services?

    Prep sites report 60% in Class 10 and 12. L&T Technology Services does not publish a Class 10 or 12 cutoff for this track, so treat it as a reported figure, not a hard line, and check the drive notification before you apply.

    What is the salary for L&T Technology Services Graduate Engineer Trainee (GET)?

    The package is around ₹4 LPA. Compensation shifts every cycle and by location, so confirm the exact number in the official offer.

    How current is this L&T Technology Services eligibility information?

    Last checked Q4 2026 against the sources listed on this page. Eligibility criteria change each hiring cycle, so always re-confirm on the official careers page before you apply.

    Source, careerstn.com, freshershunt.in, freshershunt.in, last checked Q4 2026